A Coldharbour company - serving Henderson, NV

Lennox AC Installation in Henderson, NV

AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system*On approved credit; ask us about your options

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Lennox AC Installation in Henderson: What to Know First

We install Lennox air conditioning systems for Henderson homeowners, and most full installs land between $3,500 and $7,500 depending on system size, efficiency rating, and whether ductwork needs changes. A like-for-like replacement usually takes one scheduled day; a change-out that involves new line sets, a heat pump conversion, or a mini split layout takes longer, and we tell you which before you commit. You get a written fixed price before we order anything, and the install date is set in writing. Call (844) 797-5122 for a free estimate.

Call (844) 797-5122

This page is for people who already own a Lennox system, or who’ve been quoted one, and want a straight answer on what installation involves in Henderson. We work on nine major residential HVAC brands, and Lennox is one of the ones we see most in this valley.

How Lennox Products Fail – and How We Handle Them on Install

When we quote a Lennox installation in Henderson, part of the job is understanding how the old system got to the end of its life. These are the failure patterns we run into most, and what we do about them.

  • Coil corrosion on older Lennox Merit Series units. The copper-aluminum coils in mid-2000s Merit condensing units pit from the inside out here, largely because Henderson’s irrigation-heavy yards keep humidity around the coil higher than published specs assume. By the time cooling output drops, the coil usually isn’t worth replacing on a 15-year-old unit – we’ll tell you plainly when a new install makes more financial sense.
  • R-22 to R-410A refrigerant transitions in Lennox XC and Elite Series systems. If your home still runs an R-22 Lennox, a simple condenser swap isn’t legal or safe without matching the indoor coil and line set to the new refrigerant. That’s a full system installation, not a repair. We price it that way from the start so there’s no surprise mid-job.
  • Scroll compressor failures in Lennox heat pumps after the 12-year mark. Henderson’s cooling season runs long, and heat pumps in the Henderson and Green Valley areas work year-round. Compressors fail more often in units that were originally sized for heating load only. On heat pump installation, we run a proper load calculation (Manual J) so the new system fits the home’s actual cooling demand, not the old rule-of-thumb sizing.
  • Failing TXV valves on Lennox variable-capacity systems. A stuck thermostatic expansion valve on a Lennox SL-series unit causes the system to run but never hit setpoint – a symptom homeowners often misdiagnose as a refrigerant leak. It’s a parts-level repair on a newer system, but on an older one, it’s often the signal to move to a full replacement. We diagnose first and quote both paths honestly.
  • Ductwork mismatches on any Lennox replacement. Installing a high-efficiency Lennox on undersized ducts in Henderson’s older west-side neighborhoods (Green Valley Ranch, Anthem) is a waste of money. We inspect duct static pressure before quoting any install, and if the ducts need work, it’s in the written price before you sign.
Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

Our Lennox AC Installation Process

  1. 1
    Phone call and load calculation. You’ll reach a live person any hour, any day. We ask about your home’s square footage, existing Lennox model number, and whether the ducts, electrical, or refrigerant lines will need changes. Then we schedule a visit.
  2. 2
    In-home walkthrough. We inspect the existing system, take duct pressure readings, and confirm your electrical panel can handle the new unit. No guessing.
  3. 3
    Written fixed price. Before we leave, you get a written price for the installation – parts, labor, permit if needed, and any duct or electrical work. That price does not change at the door.
  4. 4
    Parts and equipment decision. We install Lennox OEM equipment that keeps your manufacturer’s warranty intact. We’ll also tell you where quality aftermarket parts make sense and where they cost you warranty coverage – we don’t push either.
  5. 5
    Install day. We arrive in the scheduled window, lay down floor protection, install the system, test the charge and airflow, and leave the site cleaner than we found it. That’s the Kingswell Way: say the price, show up in the window, leave it clean, put the guarantee in writing, come back if it fails.
  6. 6
    Written guarantee. Every job is covered by our 365-Day Done Right Promise. If a repair we made or an install issue fails within a year, we return and fix it at no charge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Lennox AC Installation Costs in Henderson

Most Lennox installations in Henderson fall in the $3,500 to $7,500 range. Here’s how those numbers break down:

Job Typical Price Range
Lennox AC replacement (like-for-like, single-zone) $3,500 – $5,200
Lennox central air installation with new line set $4,800 – $6,500
Lennox heat pump installation (with load calculation) $5,500 – $7,500
Lennox mini split installation (single zone, ductless) $3,800 – $6,000
Lennox furnace installation (paired with AC) $2,800 – $5,500

What moves the price: system size (tonnage), efficiency rating, whether you need a new line set or ductwork, and whether you’re replacing a legacy R-22 system. We don’t promise same-day installs because load calculations and equipment ordering take real time. What we do promise is a fixed written price, a firm install date, and no surprises at the door. Free estimates – call (844) 797-5122.

Why Henderson Homeowners Call Coldharbour Heating & Air Henderson for Lennox Work

We’re an independent Lennox service provider, not a factory-authorized dealer – we want that on the record. What we offer is the Kingswell Guarantee: a written price before the work starts, a firm arrival window, a clean job site, and a written guarantee that brings us back at no charge if the repair fails inside 365 days. Every technician is background-checked and uniformed, and we train them on nine major brands – Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard – so whoever shows up can work on whatever’s in your home. Our technicians have up to 23 years of experience. Phones are answered by a live person around the clock; no voicemail trees, no after-hours runaround.

FAQs

Need HVAC help nationwide? Licensed & insured · within the hour response · free estimates
Call (844) 797-5122
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - Coldharbour Heating & Air Henderson responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch