A Coldharbour company - serving Henderson, NV

HVAC Cost Breakdown: The Henderson Homeowner's Reference for 2026

Last updated November 17, 2026

AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system*On approved credit; ask us about your options

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

HVAC Cost Breakdown: The Henderson Homeowner’s Reference for 2026

The same 3-ton central AC replacement in Henderson can be quoted anywhere from $4,800 to $11,500 by licensed contractors. That spread isn’t fraud. It’s line items: one quote bundles the crane, the permit, and the thermostat; another buries them or leaves them out entirely. Unless you know what each component should cost, you can’t tell a fair quote from a padded one. This guide breaks Henderson HVAC work into its parts – equipment, labor, refrigerant, permits, financing – so you can read any quote and see exactly where the money goes.

Call (844) 797-5122

Quick Answer

A full central AC and furnace system replacement in Henderson typically runs $7,200 to $11,200 installed in 2026, depending on equipment tier, SEER2 rating, and whether ductwork needs sealing. AC repair ranges from $150 for a capacitor to $1,400 or more for a compressor, and a furnace replacement usually lands between $4,200 and $7,800. Those numbers only hold up when the quote itemizes equipment, labor, refrigerant, permit, and disposal separately.

Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

Table of Contents

How HVAC Quotes Break Down by Line Item

Every legitimate HVAC quote in Henderson covers five categories: equipment, labor, refrigerant, permits, and disposal. When a quote arrives as a single lump sum, you can’t compare it to anything. Ask for the breakdown before you sign, and read it against these benchmarks.

  • Equipment: the condenser, air handler, and any coil or furnace. This is 45 – 60% of a replacement quote.
  • Labor: removal of the old unit, installation, brazing, vacuuming the lines, and start-up testing. Usually $1,800 – $3,400 on a full system swap in Henderson, more if it’s a roof-mounted package unit or a tight attic access.
  • Refrigerant: a line-item charge for the charge weight, not a “miscellaneous” fee.
  • Permit and inspection: Clark County requires a mechanical permit for any system changeout. If it’s missing from a quote, the contractor may be planning to skip it.
  • Disposal and haul-away: $75 – $200 to remove the old equipment and refrigerant legally.

Our technicians have up to 23 years of experience reading quotes, and the pattern is consistent: the quotes that don’t itemize are the ones that grow at the door. You’ll see the same principle laid out across our Coldharbour Heating & Air Henderson home page.

AC Repair Cost in Henderson, Item by Item

Most AC calls in Henderson fall into a handful of repairs, and each has a predictable price band when the part and labor are priced honestly. Here’s what 2026 pricing looks like on the common jobs.

  • Capacitor replacement: $180 – $320. A weak capacitor is the most common single cause of a unit that hums but won’t start.
  • Contactor replacement: $200 – $360. The switch that sends power to the compressor; they pit and fail in hot weather.
  • Blower motor replacement: $450 – $850. Common in older Henderson homes where the air handler has run hard for a decade.
  • Condensate drain clearing or float switch: $150 – $280. In our humidity spikes, a clogged drain line will trip the safety switch and shut the system down.
  • Compressor replacement: $1,100 – $2,400, depending on tonnage and refrigerant type. At the top of that range, replacement of the whole condenser often makes more sense.

Every one of these repairs from us carries the 365-Day Done Right Promise: if the repair fails within a year, we return and correct it at no charge, with the guarantee in writing before the technician leaves. If you’re facing a no-cooling call today, see AC Repair in Henderson for how we handle same-day work.

Full System Replacement: What Should Be on the Quote

A system replacement isn’t one purchase. It’s a matched set of equipment plus a labor plan, and the quote should reflect both. Here’s the order we work through, and what you should see on paper for each step.

  1. Load calculation (Manual J). A room-by-room heat-load check, not a guess based on square footage. Henderson homes near the McCullough Range get more afternoon sun load than homes in Green Valley at the same size. The quote should state the calculated tonnage.
  2. Equipment line. Model numbers for condenser, coil, and air handler or furnace, with the SEER2 rating printed. Ask for the AHRI match number so you know the pieces are rated together.
  3. Line-set and electrical. Whether the existing line set is reused or replaced, and any electrical work needed to meet code on the new unit.
  4. Thermostat and controls. Is a new thermostat included, and is it a communicating model that needs extra wiring?
  5. Permit and inspection. Listed as a real dollar amount, not “included” with no number.
  6. Haul-away and cleanup. Disposal of the old equipment and refrigerant recovery.

Expect $7,200 – $11,200 all-in for a standard split system. A top-tier variable-speed Carrier, Trane, or Lennox system with a new line set can push toward the upper end. Our AC Installation in Henderson page covers how we build and price that quote.

How Refrigerant Rules Are Changing Repair Prices

Refrigerant is the line item most Henderson homeowners don’t see coming, and 2025 – 2026 is a bad time to need it. Under EPA phasedown rules, R-410A production has been shrinking, and supply has tightened enough that the price per pound has climbed sharply. Meanwhile, the newer R-454B equipment now required in new systems carries its own premium on the equipment line.

What that means when you read a quote:

  • R-410A recharge: expect to see $90 – $160 per pound on a quote, and a typical system holds several pounds. A leak that needs a full charge is a $600 – $1,400 line on its own, before the repair that stops the leak.
  • Leak search and repair: $250 – $600, depending on whether the leak is at a braze joint, the coil, or a valve.
  • R-454B conversion: you can’t retrofit an R-410A system to R-454B. When a coil or condenser fails on an older system, the refrigerant math often tips the decision toward replacement.

If a quote lists “freon” as a single vague charge, ask for the per-pound price and the system’s charge weight. That one question tells you more than any other about whether the quote is serious.

Permit and Inspection Fees You Should Expect

Clark County requires a mechanical permit for a system changeout, and the fee scales with the value of the work: typically $150 – $400 for a residential replacement. It covers the inspection that confirms the install meets code on electrical disconnect, clearances, and condensate handling. A legitimate Henderson quote lists it. A quote without it is a red flag for one of two reasons: the contractor plans to skip the permit, or they’re padding elsewhere and don’t want the line visible.

Ask for the permit number after the job. Code officials in Henderson do inspect residential changeouts, and an unpermitted install can complicate a future home sale or an insurance claim. When we write a quote, the permit fee is a numbered line, and we pull it in your name. It’s one of the five values of The Kingswell Way: say the price before the work, put the guarantee in writing, show up in the window given, leave the place cleaner than found, and come back if it fails. The permit fits under the first and last of those.

SEER2 and the 2,800-Hour Cooling Reality

Henderson isn’t Phoenix, and it isn’t Tucson. We run somewhere above 2,800 cooling hours a year, with long stretches of 105°F-plus afternoons. That changes the SEER2 math. In a milder climate, jumping from a 14.3 SEER2 base unit to a 16 SEER2 system might save $30 a year – not worth the price. Here, the extra runtime compounds.

  • Base 14.3 SEER2 system: about $7,200 – $8,600 installed. Lowest upfront, highest monthly bills.
  • Mid-tier 15.2 – 16 SEER2: roughly $8,800 – $9,900. The sweet spot for most Henderson homes – efficiency gains pay back within 6 – 9 summers.
  • High-efficiency 17+ SEER2 variable-speed: $10,000 – $11,200. Worth it in larger homes or west-facing rooms that never quite keep up.

The operating-cost difference between a 14.3 and a 16 SEER2 unit in Henderson runs $280 – $420 a year on a typical 3-ton system at current power rates. Run that against the upfront gap and the math usually favors mid-tier. Our team will put both scenarios on paper before you decide.

Financing Math for Henderson Homeowners

Same-as-cash offers are useful if you pay in full within the window. They’re expensive if you don’t. An 18-month same-as-cash plan typically reverts to a deferred-interest rate of 24 – 29% retroactive to the original purchase date if any balance remains at month 19. On a $9,000 system, that’s a sudden several-hundred-dollar interest hit in one statement.

Henderson utility rebates help shrink the balance before that deadline. Current programs for high-efficiency replacements typically credit $200 – $600 depending on SEER2 tier, and duct sealing often qualifies for a separate small credit. Apply the rebate directly to principal in month one and the same-as-cash math gets much safer.

Three practical rules:

  1. Divide the total by the number of months. Can you cover that payment every month without touching it?
  2. Apply the rebate to principal immediately, not at the end.
  3. Ask whether the dealer’s own financing beats the promotional card. A fixed 8 – 9% loan with no retroactive trap is often the safer call.

Duct Sealing and Furnace Replacement Costs

Two more jobs Henderson homeowners ask about constantly, priced line by line. Duct sealing runs $600 – $1,800 for a typical single-story home, more for two-story runs in the attic. The work is mastic and mesh on the accessible joints, plus a pressure test before and after. If a quote promises “duct sealing” without a before-and-after leak test, you’re paying for tape and hope.

Furnace replacement in Henderson usually runs $4,200 – $7,800 installed, and here’s the local wrinkle: our winters are short but cold snaps hit hard. Sizing matters more than brand tier – an oversized furnace short-cycles, and a properly sized one on a 30°F night keeps the house even. Expect the quote to list the calculated heat load, the AFUE rating (80% or 96%), the venting plan, the permit, and the thermostat. If yours doesn’t, ask why. Our Furnace Repair in Henderson page covers the repair-side costs if you’re deciding between fixing and replacing.

Common Mistakes to Avoid

  • Comparing lump sums. Two total prices tell you nothing if one includes a permit and a thermostat and the other doesn’t. Always compare line by line.
  • Skipping the load calculation. A quote that “matches the old tonnage” without a Manual J can oversize the system, and oversizing in Henderson’s heat means short cycling and early failure.
  • Ignoring the refrigerant line. In 2026, a leak repair with a full recharge can add $1,000 to a job that looked cheap. Read that line before you decide.
  • Not asking for the permit number. An unpermitted changeout can complicate an insurance claim or a future sale. Get the number.
  • Treating same-as-cash as free. If you don’t clear the balance in 18 months, the retroactive interest can erase the savings entirely.
  • Chasing the lowest SEER2 alone. In a 2,800-hour cooling market, the mid-tier system usually pays back faster than either the base or the top end.
  • Forgetting the guarantee. A verbal “we’ll take care of you” isn’t a guarantee. Ask for it in writing, and be suspicious of any contractor who won’t put it there.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

When to Call a Professional

Call for anything involving refrigerant, electrical components of the system, or gas lines to your furnace. Those aren’t DIY jobs, and a mistake on a capacitor or a gas connection is a genuinely dangerous one. Call immediately if you smell gas near the furnace, if the system trips the breaker repeatedly, or if an AC unit hums but won’t start – each points to a fault that gets worse with time. Call when you hear grinding in the blower or see ice on the refrigerant lines. And call when a quote you’ve received doesn’t add up: an itemized comparison is the fastest way to know whether you’re being looked after or padded. Coldharbour Heating & Air Henderson offers free estimates in Henderson – call (844) 797-5122.

Frequently Asked Questions

The Bottom Line

The reason Henderson AC replacement quotes span $4,800 to $11,500 is line items – what’s bundled, what’s buried, and what’s missing. Learn the five categories (equipment, labor, refrigerant, permit, disposal), insist on a load calculation, ask for the per-pound refrigerant price and the permit number, and run the SEER2 math against our 2,800 cooling hours instead of a national average. That’s how you read a quote and know what’s fair. The price should be on paper before work begins, and the guarantee should be too. If a quote you’ve received doesn’t add up, get a second one.

Coldharbour Heating & Air Henderson gives you a written price before any work begins, answers the phone with a live person around the clock, and backs every repair with the 365-Day Done Right Promise – if it fails inside a year, we return and make it right at no charge. Call (844) 797-5122 for a free estimate.

Written by the team at Coldharbour Heating & Air Henderson.

Need HVAC help in Henderson? Licensed & insured · within the hour response · free estimates
Call (844) 797-5122
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - Coldharbour Heating & Air Henderson responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch