A Coldharbour company - serving Henderson, NV
Furnace Repair in Henderson, NV | Coldharbour Heating & Air Henderson - Coldharbour Heating & Air Henderson

Furnace Repair in Henderson - Fixed Today, No Surprise Invoice

Same-day diagnosis with the repair price given before any work starts, and an honest repair-versus-replace answer when the system is near the end of its life.

We answer around the clock

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Furnace & heatingFurnace & heating
AC repairAC repair
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system*On approved credit; ask us about your options

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Trusted Furnace Repair for Henderson Homeowners

When the heat stops on a January night in Henderson, you need a real answer, not a call-back tomorrow. Furnace repair in Henderson typically runs $150 – $700, and we aim to get a technician to your door the same day you call. Our technicians bring up to 23 years of experience and are trained on Carrier, Trane, Lennox, and Goodman systems, so whatever is in your garage or closet, we’ve likely worked on its twin. We also know this town: the hard desert air, the dust that finds its way into every burner compartment, the way a furnace that sat idle through a 110-degree summer can fail on the first cold snap. That’s why we answer the phone with a live person, day or night, and put our price in writing before a single tool comes out. Call (844) 797-5122.

Call (844) 797-5122

Furnace Maintenance

Furnace Maintenance is the scheduled check-up that keeps your system running through the cold months and catches small problems before they turn into $700 repairs. You need it once a year, ideally in the fall before Henderson’s first genuinely cold nights, and more often if your home gathers dust from nearby construction or open desert lots. Coldharbour Heating & Air Henderson sends a background-checked technician who inspects the heat exchanger, cleans the burners, checks the blower and the flue, and hands you a written report of exactly what was found. A standard maintenance visit runs $80 – $200, and it’s worth noting that technicians are not paid on what they sell you, so the report is honest. If anything needs fixing, you get a written price before work begins.

What a Seasonal Visit Covers

A maintenance visit covers the parts of your furnace that wear quietly: the burners, the igniter, the flame sensor, the blower belt and motor, and the heat exchanger. We check gas connections for leaks and confirm the flue is venting properly. You leave with a written summary you can keep for your records.

Why Fall Timing Matters Here

Henderson furnaces sit unused for months in the heat, then get called on suddenly when temperatures drop. That first cold snap is when dust-clogged burners and corroded sensors fail. Booking maintenance in September or October means you’re not competing for a technician’s time in the middle of the first cold week.

Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

Heat Pump Repair

Heat Pump Repair fixes the dual-purpose system that heats in winter and cools in summer, and when it fails, you lose both halves at once. You need it when your heat pump blows cold air in heating mode, runs constantly without reaching the set temperature, or trips the breaker. Homes across Henderson and nearby Whitney rely on heat pumps because they handle both seasons efficiently, but that means twice the wear. Coldharbour Heating & Air Henderson diagnoses reversing valves, defrost boards, compressors, and refrigerant charge, then explains the problem in plain English. Most heat pump repairs fall in the $150 – $700 range, and some complex compressor work can run higher; we give you the written price before touching anything.

Heating Mode Failures

When a heat pump blows cool air in heating mode, the usual culprits are a stuck reversing valve or a failed defrost control board. Both are fixable, and neither requires replacing the whole system. Our technician tests the valve and board directly before recommending any part.

Refrigerant and Compressor Checks

Low refrigerant charge (the cooling fluid your system circulates) can starve a heat pump in either mode. We check charge levels and look for leaks rather than simply topping off, because topping off without finding the leak just delays the same failure.

Heating Repair

Heating Repair covers any fix that gets your home warm again, whether that’s a furnace, a heat pump, or a packaged unit. You need it when the system runs but doesn’t heat, heats unevenly, makes banging or rumbling sounds, or smells like something burning. Henderson winters aren’t brutal, but a failed heater on a 40-degree morning still matters, especially in homes with older residents or young kids. Coldharbour Heating & Air Henderson brings diagnostic tools to trace the actual fault rather than guess, and technicians are trained on nine major brands including Carrier and Trane. Typical heating repair costs sit in the $150 – $700 range depending on the part and labor involved. You’ll see the written price before we start, and the repair is backed by our 365-day guarantee.

Uneven Heat and Cold Rooms

When one room stays cold while the rest of the house warms fine, the issue is often airflow: a failing blower, blocked ductwork, or a damper stuck closed. We measure airflow at the registers to confirm before recommending anything. It’s rarely the furnace itself.

Strange Noises and Smells

Banging, rumbling, or a burning smell means something is physically wrong: a loose blower wheel, a delayed ignition, or a cracked component. Turn the system off and call us rather than running it further. These symptoms rarely fix themselves and often get worse.

Boiler Repair

Boiler Repair addresses the hydronic heating systems, common in some older Henderson homes and in properties with radiant floor heat, that heat water rather than air. You need it when radiators stay cold, the boiler cycles constantly, pressure keeps dropping, or you hear kettling (a rumbling sound from inside the unit). Boilers use water, gas, and pressure together, and that combination deserves a trained technician rather than a homeowner with a wrench. Coldharbour Heating & Air Henderson checks the circulator pump, expansion tank, pressure relief valve, and burner assembly, then tells you plainly what failed. Boiler repairs generally run $150 – $700, and higher for major component replacement. We give you the written price first, every time.

Pressure and Leak Problems

A boiler that keeps losing pressure has a leak somewhere, whether in the unit itself or in the piping. We track it down with a pressure test rather than repeatedly refilling the system. Refilling masks the problem and can damage components over time.

Kettling and Circulation Faults

Kettling usually points to limescale buildup or trapped air in the system, and it puts stress on the heat exchanger. A circulator pump that’s failed will leave radiators cold even when the boiler is firing. Both are diagnosable and fixable.

Gas Furnace Repair

Gas Furnace Repair handles the fixes specific to gas-fired heating: ignition problems, flame sensor faults, gas valve issues, and heat exchanger concerns. You need it when the furnace clicks but won’t light, lights and then shuts off after a minute, or produces a yellow rather than blue flame. Gas work carries real safety stakes, so we say this plainly: do not attempt to open the burner compartment or touch gas connections yourself. Coldharbour Heating & Air Henderson technicians are trained on gas systems and check for leaks and proper venting on every gas furnace call. Most gas furnace repairs fall between $150 and $700, with the written price delivered before work starts. The repair carries our 365-Day Done Right Promise.

Ignition and Flame Sensor Faults

A furnace that clicks and never lights usually has a failed igniter or a dirty flame sensor. The sensor’s job is to confirm a flame is present; when it’s coated in dust, it shuts the furnace down as a safety measure. Cleaning or replacing it is a quick, affordable fix.

Heat Exchanger Safety

A cracked heat exchanger can let carbon monoxide into your home’s air, which is a genuine health risk. We inspect the exchanger on every gas furnace call and tell you honestly if it’s compromised. If it is, we explain your options rather than push a replacement.

Furnace Tune Up

Furnace Tune Up is the focused service that keeps a working furnace running efficiently and safely through the season, and it’s the cheaper cousin of full maintenance. You need it when your furnace runs but your gas bill has crept up, when it’s been more than a year since anyone looked at it, or before you sell a house. Coldharbour Heating & Air Henderson performs a tune up for $80 – $200, covering burner cleaning, filter check, blower inspection, and a safety check on the heat exchanger and flue. You get a written report of what we found, and the technician isn’t paid on what he sells you, so there’s no pressure to approve work you don’t need.

Efficiency and Gas Bill Changes

A dirty burner or a clogged filter forces the furnace to work harder for the same heat, and you feel it in the monthly bill. A tune up restores efficiency without replacing anything. If we find a genuine fault, we quote it separately with a written price.

Filter and Airflow Check

Henderson’s dust means filters load up faster than in humid climates. We check filter condition, confirm airflow at the blower, and tell you the right replacement interval for your home. A restricted filter strains the blower motor and shortens its life.

Emergency Furnace Repair

Emergency Furnace Repair is the fast-response service for when your heat fails and you can’t wait until a weekday appointment. You need it when the furnace dies on a cold night, when you smell gas, or when the system trips a breaker repeatedly and you have young children or older family members in the house. Coldharbour Heating & Air Henderson answers the phone with a live person 24 hours a day, seven days a week, so you’re never routed to voicemail at 2 a.m. Emergency calls run in the $150 – $700 range depending on the fault, and you still get the written price before work begins, even at night. A cold house in winter is a real safety concern, and we treat it that way.

Gas Smell: What to Do First

If you smell gas, leave the house, don’t flip any switches, and call from outside. Then call us and we’ll get a technician moving. Gas odors are the one situation where you don’t wait to see if it clears on its own.

After-Hours Response

Our after-hours line reaches a live person, not a recording, and we dispatch a background-checked technician as quickly as we can. We won’t promise a time we can’t keep, but we’ll tell you honestly how the night looks. You get the written price before the technician starts work.

Brands We Service

We service Carrier equipment and know where the ignition and control board components tend to wear first. We service Trane systems and can diagnose the variable-speed blower and communicating controls that Trane uses on many of its newer furnaces. We service Lennox furnaces and are familiar with their specific heat exchanger designs and the airflow issues that show up when filters aren’t kept clean. We service Goodman furnaces too, and know their common igniter and flame sensor faults well enough to diagnose them quickly.

Our technicians are trained across nine major residential HVAC brands, which means whether you have a Carrier, a Trane, a Lennox, a Goodman, or any other make, we can help. No need to hunt down a brand-specific specialist. One call, and the right technician shows up.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • You smell gas. A rotten-egg odor near the furnace means a gas leak. Leave the house and call us from outside right away; don’t wait to see if it fades.
  • The furnace clicks but won’t light. A persistent clicking with no flame usually means a failed igniter or flame sensor. It won’t fix itself, and it can keep tripping the safety shutoff.
  • You hear banging or rumbling. Delayed ignition or a loose blower wheel can cause this. Left alone, a delayed ignition puts stress on components and can damage the heat exchanger.
  • The flame is yellow, not blue. A healthy gas flame is blue. A yellow flame can signal incomplete combustion, which produces carbon monoxide. Shut it down and call us.
  • The breaker keeps tripping. A furnace that trips its breaker repeatedly has an electrical or motor fault. Don’t keep resetting it; call for diagnosis before the problem spreads.

Our Process, Step by Step

  1. 1
    You call, and a live person answers. No voicemail tree, no after-hours runaround, any hour of the day. We’ll ask a few questions to understand the symptom and get you on the schedule with a firm arrival window.
  2. 2
    We show up inside that window. The technician is background-checked and uniformed, so you know who’s at your door. If something changes, we call you rather than leaving you guessing.
  3. 3
    We diagnose with real tools. We use multimeters, manometers, and combustion analyzers to trace the actual fault rather than guess at parts. You get a plain-English explanation of what failed and why.
  4. 4
    We hand you a written price before any work. The price shown is the price you pay; it doesn’t change at the door. You approve it, or we leave and you owe nothing for the visit beyond the diagnostic.
  5. 5
    We finish, clean up, and put the guarantee in writing. You get a written 365-Day Done Right Promise before the technician leaves. If the repair fails inside a year, we come back and fix it at no charge.

How Much Does Furnace Repair Cost in Henderson?

Furnace repair in Henderson runs $150 – $700 for most common jobs, and the specific number depends on the part and the labor involved. A typical igniter or flame sensor replacement in Henderson runs $150 – $280 depending on the access and the part. A blower motor replacement runs closer to $400 – $700. Gas valve or control board work sits in the middle of that range, and major component replacement on an older system can push past $700; we tell you upfront when that’s the case so there are no surprises.

What affects the price: the part itself, how hard it is to reach inside your particular installation, whether the system is a high-efficiency model with more complex controls, and whether the job needs after-hours dispatch. The way to avoid overpaying is simple: get the written price before the work starts, and ask whether the technician is paid on what they sell you. Ours aren’t, which means the diagnosis you get is the honest one.

What’s included in a free estimate: a full diagnosis, a plain-English explanation of what failed, a written price for the repair, and the 365-Day Done Right Promise on any work you approve. Nothing is added after the fact. When your cooling system needs attention too, our AC repair service follows the same written-price standard, and if you’re weighing a full system replacement, our AC installation team handles that separately with a load calculation before any equipment is ordered.

Our Service Area Near Henderson

We serve Henderson and the surrounding communities, including Whitney, Paradise, Winchester, Enterprise, Sunrise Manor, Boulder City, Spring Valley, Summerlin, North Las Vegas, Las Vegas, and Sandy Valley. Response times vary by location and how busy the day is, but a live person answers whenever you call, day or night, and we’ll tell you honestly when a technician can be at your door. If you’re in Whitney, our Furnace Repair in Whitney page covers the specifics there, and for Paradise, see Furnace Repair in Paradise. Return to our home page for the full picture of what we do.

Serving Henderson, NV – Our Local Coverage Area

We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Furnace Repair in Henderson

Schedule Your Furnace Repair Service in Henderson Today

Don’t sit in a cold house waiting for a callback that never comes. Call (844) 797-5122 and a live person answers, any hour, any day. You get a free estimate with a written price before any work begins and the 365-Day Done Right Promise in writing. No-obligation, no surprises. We’re ready when you are.

Written by the team at Coldharbour Heating & Air.

Why Henderson Chooses Coldharbour Heating & Air Henderson

We set the standard for furnace repair in Henderson.

30-60 Min Response

Fast dispatch across Henderson. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Henderson

Getting your furnace repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your furnace repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Henderson - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local furnace repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Henderson Customers Say

Trusted by homeowners across Henderson and surrounding areas.

★★★★★

"AC quit on the hottest day of the year of course. Coldharbour had a tech out that evening, found a bad capacitor, and had us cool again within the hour. Charged the quote, not a penny more."

Doug Feeney
★★★★★

"New AC and furnace. They gave me a written quote with a couple of options and no pressure. Showed up on the day they promised and the new system is so much quieter."

Gloria Dunn
★★★★★

"Signed up for a tune up before summer. He found a part starting to fail and showed me the reading, didn't just tell me to trust him. Fixed it then so we wouldn't get stuck in July."

Sophia Tran

Ready for Furnace Repair in Henderson?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Henderson.

(844) 797-5122

Request a Free Estimate in Henderson

Tell us about your furnace repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch