Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted AC Installation for Henderson Homeowners
If your AC is 12 or 15 years old and you’ve already paid for two repairs this year, the next failure isn’t a repair problem – it’s a replacement problem. Installing a new system properly, sized to your home and the way Henderson heat actually behaves, is the difference between a cool summer and an expensive one. Our technicians have up to 23 years of experience and are trained to service nine major residential brands, including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. Replacement work here is scheduled, not rushed: we measure the house, calculate the load, order the equipment, and lock in a firm install date with a written fixed price before any work begins. Call us at (844) 797-5122 to get started.
Furnace Installation
Furnace Installation is the replacement or first-time fitting of a gas or electric heating unit, ducting connections included, and it’s worth planning in Henderson before the December nights that drop into the low thirties. Most homes reach that point when the existing furnace is 15 years or older, when its heat exchanger has been flagged, or when repair bills have started overtaking the cost of a new unit. Coldharbour Heating & Air Henderson handles the full job: a written price upfront, the equipment delivered and set on a scheduled date, and a clean site when we leave. Heating installs on our menu sit within the same $3,500 – $7,500 range as cooling work, depending on size, efficiency tier and duct condition.
Sizing and Load Calculation
We measure square footage, window area, insulation and sun exposure, then run a Manual J load calculation (the industry’s room-by-room method for matching equipment to a house). A furnace that’s oversized short-cycles, wears out its blower early and heats unevenly. One that’s undersized never catches up on a 40-degree morning.
Permits and Inspection
Henderson requires a mechanical permit for furnace replacement, and the work has to be inspected before the unit is signed off. We pull that permit, schedule the inspection and keep the paperwork with the homeowner. You don’t chase the city on our behalf.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
HVAC Installation
HVAC Installation covers a full heating-and-cooling package – condenser, air handler or furnace, coil and thermostat – installed as one matched system rather than a mix of parts from different eras. It’s the right call when both halves of the system are aging out together, or when a previous owner paired mismatched equipment that never worked well. Coldharbour Heating & Air Henderson quoted (at) a written price, orders the equipment, and handles rebate and financing paperwork for the homeowner before the crew arrives. Full system installs land in the $3,500 – $7,500 band most Henderson homeowners expect, with the final number set by tonnage, efficiency rating and any duct repair.
Matched System Components
An evaporator coil rated for a different tonnage than the condenser will shorten compressor life and cut efficiency. We match every component within the same brand family – a Trane condenser paired with a Trane coil, for example – so the system performs as designed. Mixing brands is possible, but it’s a decision we explain before we recommend it.
Thermostat and Controls Setup
We program the new thermostat for Henderson’s cooling-heavy schedule and walk the homeowner through it before we leave. Smart thermostats get connected to Wi-Fi and tested on a full cooling cycle. If you’d rather keep a simple programmable unit, that’s fine too.
Heat Pump Installation
Heat Pump Installation means fitting a single system that both cools in July and heats in January by reversing the refrigerant cycle – no gas line, no separate furnace. In Henderson it’s a practical fit for homeowners moving off gas, adding a room over a garage, or replacing an aging electric furnace where the summer load is already the main cost driver. Coldharbour Heating & Air Henderson provides a written price before the work starts, schedules the install date, and handles available rebate paperwork. Heat pump projects typically fall in our $3,500 – $7,500 range, with cold-climate models and ductless heads at the higher end.
Cold-Climate Performance
Standard heat pumps lose capacity as outdoor air drops. Henderson winters rarely test that limit, but cold-climate units hold their output lower and are worth the difference for homes at higher elevation on the city’s edges. We read the spec sheet with you rather than quoting a single number.
Defrost Cycles and Drainage
The outdoor unit runs a defrost cycle in cold weather and produces condensate that has to go somewhere. We set the drain line with proper slope and freeze protection so ice doesn’t back up into the unit. It’s a small detail that causes big service calls when it’s skipped.
Ductless Mini Split Installation
Ductless Mini Split Installation adds a wall-mounted air handler and outdoor compressor without running ductwork through walls or attic space – the fix for a Henderson addition, a converted garage, or a room the central system never cooled evenly. It’s also the right answer when a homeowner wants zone control instead of cooling the whole house to keep one bedroom comfortable. Coldharbour Heating & Air Henderson surveys the space, sets the indoor head placement with you, and gives you a firm written quote and install date. Single-zone systems sit at the lower end of the $3,500 – $7,500 range; multi-zone setups and long line runs move upward.
Indoor Head Placement
Airflow matters more than the spec sheet. We place the indoor head high on an exterior wall, clear of furniture and direct sun, and check that the throw pattern reaches the far side of the room. A head in the wrong spot cools the ceiling and leaves the sofa warm.
Line Set Routing and Drainage
The refrigerant line set runs through the wall to the outdoor unit, and the condensate drain has to fall continuously or it clogs. We route both through the shortest practical path and seal the wall penetration. That keeps bugs, dust and Henderson summer heat out of the wall cavity.
AC Replacement
AC Replacement is the swap-out of a failed or exhausted condenser and coil for a new system while keeping your existing ductwork and air handler when they’re still sound. It’s the right move when the compressor has failed on a unit past 12 years, when R-22 refrigerant is no longer available, or when repair quotes start approaching half the price of new equipment. Coldharbour Heating & Air Henderson gives you a written price upfront, tells you honestly whether replacement or repair is the better call, and schedules the install with no overtime charge. AC Replacement in Henderson runs $3,500 – $7,500, with the final figure set by tonnage, efficiency tier and whether the coil and line set also need replacing.
When Repair Stops Making Sense
Our rule: if a single repair costs more than a third of a new system, replacement wins on math. Age matters too – the SEER rating (efficiency score, higher is better) on units from 2008 or earlier is far below current equipment. We quote both paths so you can compare.
Refrigerant Transition
Older systems used R-22, which is phased out and no longer manufactured. If your unit still relies on it, a recharge isn’t a fix, it’s a bridge. A new system runs on current refrigerant, which is available and far cheaper per pound.
Central Air Conditioning Installation
Central Air Conditioning Installation is the full install of a ducted cooling system – condenser, evaporator coil, air handler and refrigerant lines – feeding every room through the home’s ductwork. It’s the choice for homeowners replacing a whole system, adding AC to a house that only had a furnace, or upgrading after years of uneven cooling and high bills. Coldharbour Heating & Air Henderson takes the full job: a written fixed price before any tools come out, a set install date, and the permit and rebate paperwork handled. Central installs run $3,500 – $7,500 in Henderson, with the higher end reserved for larger homes, higher-efficiency units and duct repairs.
Duct Inspection and Sealing
New equipment on leaky ductwork wastes money. We pressure-check the ducts and seal the joints that matter, and we’ll tell you upfront if a section is beyond saving. In older Henderson neighborhoods, attic ducts from the 1980s and 1990s are the common failure point.
Efficiency Ratings and Rebates
Higher SEER2 equipment costs more upfront and uses less power. We run the math against Henderson’s heavy cooling season so you can see the payback window. Available utility rebates are also folded into the written quote.
Brands We Service
We’re trained on nine major residential brands, so the technician who shows up can work with whatever system is already in your home. Carrier equipment has a long installed base across Henderson, and we know where its control boards and capacitors tend to fail first. Trane units run solid compressors but their variable-speed blowers need proper commissioning to hit rated efficiency. Lennox is common in higher-efficiency homes, and its communicating systems need careful matching during replacement. Goodman equipment is the most price-accessible on the market and straightforward to work on, and we replace its coils and capacitors regularly.
We also service Rheem, York, Daikin, Bryant and American Standard, from single-stage condensers to variable-speed heat pumps. Each brand has its quirks, and knowing them is part of what our technicians’ up-to-23-years of experience buys you. Whether you have Carrier, Trane, Lennox, Goodman or any other make, we can help – and the price is in writing before the work starts.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Warm air from the vents. If the AC runs but the air coming out feels like room temperature, the compressor or refrigerant charge is likely the problem. That’s not a homeowner-fixable issue and it only gets worse as the unit runs.
- Water pooling around the indoor unit. A clogged condensate drain or a frozen coil is almost always the cause. Left alone, water damages drywall, subfloor and the air handler itself.
- Rattling, grinding or screeching. A failing blower bearing or loose fan can sound like a metal-on-metal rattle. Grinding often means a component is about to seize.
- Ice on the refrigerant line. Frost on the copper line at the outdoor unit signals low refrigerant or restricted airflow. Continuing to run it stresses the compressor.
- Electric bills climbing without explanation. A unit losing efficiency quietly can run 20 – 30 percent higher on your bill before it fails outright. A tune-up often catches it in time.
Our Process, Step by Step
- 1
Phone call and quick triage. A live person answers around the clock. We ask enough questions to know whether you’re facing a failed compressor, a frozen coil or a system that’s simply past its service life.
- 2
On-site assessment and load calculation. A background-checked, uniformed technician measures the home, checks ductwork and runs a Manual J load calculation. That’s the difference between guessing at tonnage and matching the equipment to the house.
- 3
Written price before any tools come out. You get the full price on paper – equipment, labor, permits, disposal – before work starts. It doesn’t change at the door, and it doesn’t change after the fact.
- 4
Scheduled install with a firm window. We set the install date at the time of the quote. Permits are pulled, equipment is ordered and the window is kept.
- 5
Commissioning and the written guarantee. We run a full cooling cycle, verify refrigerant charge and airflow, and walk you through the system. Every repair is backed by the 365-Day Done Right Promise – if it fails within a year, we come back and fix it at no charge.
How Much Does AC Installation Cost in Henderson?
A typical AC installation in Henderson runs $3,500 – $7,500 depending on system size, efficiency rating and duct condition. A standard 2-ton single-stage replacement for a mid-size home in Green Valley lands toward the lower end. A 3.5-ton high-efficiency system with duct sealing pushes toward the upper end. Heat pump installs and multi-zone ductless setups can go beyond that range when a home needs refrigerant line runs through finished walls or an electrical panel upgrade to handle the new equipment.
What moves the price: equipment tonnage (Henderson’s summer heat pushes most homes one size up on load), efficiency tier (SEER2 ratings, higher means more upfront and less monthly), duct condition, and whether the refrigerant line set must be replaced. Electrical work is the most common surprise – older panels sometimes can’t support a new condenser’s amperage, and that has to be fixed before the install.
How to avoid overpaying: insist on a written price before work starts, ask whether the quote includes permits and haul-away, and get a load calculation rather than a rule-of-thumb tonnage. A contractor who quotes by square footage alone is guessing. Our written estimates include the load calculation, permit, haul-away and any duct repair, so there’s nothing to discover at the door. Consult our home page for the full picture of what we cover.
Our Service Area Near Henderson
We serve Henderson and the surrounding neighborhoods – Whitney, Winchester, Enterprise, Sunrise Manor and Boulder City are all part of our regular routes. To the west, we cover Paradise, Spring Valley, Summerlin and Las Vegas; to the south, Sandy Valley and North Las Vegas. Most locations inside the city see a technician the same day for repair calls, and installs are scheduled on the date you choose. If you’re nearby and want details for a specific area, our AC Installation in Whitney and AC Installation in Paradise pages cover the local specifics.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About AC Installation in Henderson
AC Installation is the removal of an existing air conditioner and the fitting of a new condenser, coil and refrigerant lines – or, for a home without cooling, the first-time install of ducted or ductless equipment. It’s a permitted job in Henderson, and it involves sizing the system to the home’s heat load. Installation work is scheduled, load-calculated and permits are handled before the crew arrives.
A standard single-zone replacement takes most of one day, typically 6 to 8 hours, and a full system with ductwork runs a day and a half. Ductless multi-zone installs sometimes stretch to two days if line sets have to be routed through finished walls. We give you the expected window on the written quote, so there’s nothing vague about it.
Most AC installations in Henderson run $3,500 – $7,500, with the final figure set by tonnage, efficiency tier and duct condition. Heat pump and multi-zone ductless projects land at the upper end of that range. Call (844) 797-5122 for an exact quote – estimates are free, and the price is in writing before work starts.
Yes – we’re trained on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant and American Standard. That covers most residential equipment installed across Henderson over the past three decades. We service what’s in your home, and we can quote a replacement in the same visit if the system is past saving.
Our phones are answered by a live person 24 hours a day, every day of the year, and repair calls are dispatched the same day inside Henderson. If your system dies in the middle of a July heatwave, call first, and we’ll tell you the earliest arrival window. Installations are scheduled, but a failed unit gets triaged the same day.
Every repair we do is covered by the 365-Day Done Right Promise: a written guarantee, valid for a full year. If the repair fails inside that window, we come back and correct the work at no charge. Equipment warranties come from the manufacturer and depend on the brand and model you choose.
Clear a path to the indoor unit, the outdoor unit and the thermostat – about 3 feet of clearance is enough. Move or cover any furniture near the work area and confine pets. Make sure someone over 18 is home to sign the paperwork and walk through the system at the end.
Schedule Your AC Installation Service in Henderson Today
When you’re ready to replace or install in Henderson, call Coldharbour Heating & Air at (844) 797-5122. You’ll get a live person around the clock, a written fixed price before work begins, and a firm install date. Estimates are free and there’s no obligation. Our team stands behind every job with the 365-Day Done Right Promise.
Written by the team at Coldharbour Heating & Air.